Description
OKS 410 is a high-pressure long-life grease for lubrication points subjected to pressure or impacts also under outdoor exposure.
Applications
▪ Grease lubrication of unsheltered parts subject to heavy
loading and/or impacts, such as friction, rolling and pivoting
bearings, splined shafts, knockout spindles, threaded
spindles and sliding surfaces of all kinds
▪ For harsh operating conditions
Advantages and benefits
▪ Excellently suited as a safety lubricating grease in mixed
friction sector with especially good wear protection
▪ Effectively protects against corrosion
▪ Contains Mox-active to improve performance
Branches
▪ Municipal services
▪ Chemical industry
▪ Glass and foundry industry
▪ Rail vehicle technology
▪ Logistics
▪ Iron and steel industry
▪ Rubber and plastic processing
▪ Shipbuilding and marine technology
▪ Plant and machine (tool) engineering
▪ Paper and packaging industry
Application tips
For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the
corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease.
Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free
inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to
the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service
conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of
شرح
OKS 410 یک گریس پرفشار با طول عمر بالا برای نقاط روانکاری است که تحت فشار یا ضربه قرار می گیرند، همچنین در معرض قرار گرفتن در فضای باز.
برنامه های کاربردی
▪ گریسکاری قطعات بدون پوشش در معرض سنگین
بارگذاری و/یا ضربه، مانند اصطکاک، غلتش و چرخش
یاتاقان ها، شفت های اسپلینت شده، دوک های ضربه ای، رزوه ای
دوک ها و سطوح کشویی از همه نوع
▪ برای شرایط سخت عملیاتی
مزایا و مزایا
▪ به عنوان یک گریس روان کننده ایمنی در مخلوط بسیار مناسب است
بخش اصطکاک با حفاظت از سایش به خصوص خوب
▪ به طور موثر در برابر خوردگی محافظت می کند
▪ حاوی Mox-active برای بهبود عملکرد
شاخه ها
▪ خدمات شهری
▪ صنایع شیمیایی
▪ صنعت شیشه و ریخته گری
▪ فناوری وسایل نقلیه ریلی
▪ لجستیک
▪ صنعت آهن و فولاد
▪ پردازش لاستیک و پلاستیک
▪ کشتی سازی و فناوری دریایی
▪ مهندسی کارخانه و ماشین (ابزار).
▪ صنعت کاغذ و بسته بندی
نکات کاربردی
برای بهترین نتیجه، نقطه روغن کاری را به دقت تمیز کنید. با حلال هایی مانند OKS 2610/OKS 2611 Universal Cleaner تمیز کنید. را حذف کنید
محافظت در برابر خوردگی قبل از پر شدن اولیه یاتاقان ها را به گونه ای پر کنید که تمام سطوح کاربردی مطمئناً گریس بگیرند.
بلبرینگ های آهسته (مقدار DN < 50000) باید به طور کامل پر شوند، یاتاقان های متحرک معمولی باید تا ۱/۳ آزاد پر شوند.
فضای داخلی مسکن دستورالعمل های سازنده بلبرینگ یا ماشین را رعایت کنید. روغن کاری مجدد با گریس پیل روی
نوک سینه های گریس یا با سیستم روانکاری خودکار. فواصل روانکاری مجدد و مقداری که باید تعریف شود. به خدمت
شرایط اگر حذف گریس قدیمی امکان پذیر نیست، مقدار گریس باید محدود شود تا از روغن کاری بیش از حد جلوگیری شود.
بلبرینگ در فواصل طولانیتر روغنکاری مجدد، تعویض کامل گریس قدیمی توصیه میشود. فقط با مناسب مخلوط کنیدthe bearing. At longer relubrication intervals a complete exchange of the old grease is recommended. Only mix with appropriate
از این پس می توانید محصولات درخواستی خود را از طریق آنلاین سفارش داده و پیش فاکتور دریافت نمایید