شرکت تامین روانکار ایرانیان

Benefits for your application
– The oils meet the requirements according to DIN 51517-3, CLP. Corresponding gears
can be switched to Klübersynth GH 6 oils without prior consultation provided the general application notes are
observed.
– KlüberComp Lube Technology involves the selection of high-quality raw materials and individual consultation and
services by Klüber Lubrication, ensuring high-performance lubrication of different gearbox components.
– As of ISO VG 220 the scuffing load stage API GL-5 is achieved. Gears are sufficiently
protected against scuffing even under high peak loads.
– The oils’ high micropitting resistance acc. to FVA 54 GFT ≥ ۱۰ offers sufficient protection to gears that are subject to
high loads and would normally be susceptible to this type of damage.
– Good wear protection prevents premature rolling bearing failure.
– Much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the base oil; thus
maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.
– Owing to the wide service temperature range a single viscosity grade can cover both low and high temperatures in
many applications.
– The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency.
– The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated
and high temperatures.
– Seals made of 72 NBR 902 (except ISO VG 22), 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GH 6 oils.
Leakage and contamination are prevented.
– Approved by Siemens (Flender), Siemens Geared Motoros, SEW Eurodrive, Getriebebau Nord, Stöber
Antriebstechnik, Lenze, ZAE Antriebssysteme, Bonfiglioli, Rossi Motoriduttori, Motovario, Moventas, Boston Gear,
Baldor and many more.
Description
Klübersynth GH 6 oils are gear oils on a polyglycol basis. They
have a high scuffing load capacity and micro-pitting resistance.
These oils have also proved their good wear protection in rolling
bearings on the FAG FE8 test rig for gear oils. Klübersynth GH 6
oils stand out for their excellent ageing and oxidation resistance,
good viscosity-temperature behaviour and very good thermal
stability.
Application
Klübersynth